Staley Co.

Aircraft Ground Support
Test Equipment and Engine Test Cells

Damper Piston Hydraulic Test Stand Model D39230

The test stand is designed to carry out testing and maintenance procedures on aircraft damper pistons. The test stand is of welded stainless steel monocoque construction with all heavy loads supported on a steel channel section base. The oil tank is also welded stainless steel. The test stand is designed to use MIL-H-83282 oil.

Model 39230 is equipped with a piston pump capable of supplying hydraulic oil at 15 GPM up to 1500 PSI to the unit under test (UUT), this pump comes close-coupled to a 20HP motor. A second gear pump is connected via a through shaft to supply hydraulic pressure to the pilot port of an electronic proportional relief valve. System hydraulic pressure is controlled using a panel mounted potentiometer to position the electronic proportional relief valve.


For more information please write us at sales@staleyco.com

Or you can send us a quote request directly and we will consult you on our products.

Category:

Additional information

Width

60 inches

Depth

52 inches

Height

104.1 inches

Weight

Approximately 2500 lbs.

Fluid

MIL-H-83282, 60 gal capacity

Max Pressure

1500 PSIG

Max Flow

15 GPM